How to put a new tile without removing the old one

How to put a new tile without removing the old one?

Wall works

When working with tiles that you are going to lay on the floor, there are much fewer problems than with finishing tools that are designed to organize the surface of the walls.

Laying tiles on the wallThe reason for this is quite simple - the force of gravity also acts on the wall tile, as a result of which it pulls itself downwards. It is possible to put an additional layer of material, covering the old plane with it, but it is necessary to approach this issue with the utmost care and to carry out thorough preparation.

Such a solution is most often used for the bathroom and kitchen - that is, those rooms where ceramic facing is resistant to moisture and high temperatures.

Checking old cover

Small steel hammerFirst of all, you need to understand whether the builders complied with the technology when they laid the old tile - for this it is better to take the smallest steel hammer and tap the entire surface without losing a single square.If there are cavities inside, then the durability of the coating will be broken - it will be displayed in the echo bell, which will be heard from under the ceramic layer.

As a working tool, you can take a special hammer, equipped with a copper heel - it has the best acoustic properties that are important in this case. If there are small chips or open seams and ends, try to understand what the foundation was laid on the tile.

The best option is a mortar consisting of synthetic andCeramic tile on a synthetic mixturemineral components - most professionals recommend laying tiles using such a tool.

Synthetic blends hold tiles well from materials such as:

  • ceramics;
  • tile;
  • ceramic granite;
  • composite ceramics.

Preparing for the second layer of tile

Now it is necessary to provide the necessary adhesion properties, because the finishing tile in the bathroom often has a smooth glossy surface that is not able to properly hold the surface layer of a large mass.

Polishing tilesTo do this, remove the top layer using a grinder or grinder with a special brush consisting of steel wire. In addition, the old surface can be treated with an abrasive disc, creating cross cuts on it, which increase the adhesion efficiency of the adhesive composition.

As a basis, which must be put under a new material, it is better to use a concrete contact compound containing various synthetic components that increase the strength of the compound. It is necessary to add needle quartz to it, which replaces sand with itself when it is necessary to create very strong concrete structures.

Applying tiles on the wall

At the beginning of work, the seams should be additionally cleaned with a chisel in order to improve their filling capacity with mortar. Using a trowel or a trowel, we put the concrete contact on the old tile, not forgetting to level it to achieve the maximum quality of the created surface.

Material consumption should be about 300 grams per square meter - this means that it should be applied in a not very thick layer.

If this recommendation is not followed, the strength of the finish will be called into question. If you work in the bathroom or kitchen, and not the back room, then the floor and furniture should be covered with plastic wrap - otherwise ugly pink and gray spots will appear on all interior items and designs,which is almost impossible to wash.

Applying tile glueAfter 5-7 hours glue is applied over concrete contact - it is best to select the most durable synthetic modification. It is worth remembering that, unlike the base, the glue hardens almost instantly, so further work is carried out in small parts of 1-2 square meters.

It is necessary to press the tile to the surface and then release it, having checked the strength of its connection - this way the entire treated area is laid out. While the glue has not yet hardened, you can correct the irregularities and adjust the depth - for this you should use a rubber mallet.

We must not forget that between the squares there should be a gap of 1-5 mm to expand with temperature.

Floor laying

Features flooring

Ceramic floor tilesUnlike walls, tiles located on the floor are not affected by gravity. However, another difficulty arises here - passing people, installed furniture and various appliances, as well as the equipment being carried, put pressure on it every day. Therefore, the floor tiles need to check no less carefully than the finishing wall - it uses a similar method with a hammer.

In addition, you can find a heavy box or an item with a flat base — you must drag it all over the floor and make sure that the tiles on it do not fall inward even a few millimeters. However, the latter method is unlikely to be applicable for a bathroom with its limited space.

Tiled flooringAfter you have checked the old tile, you can start work, generally following all the recommendations described for the walls. However, the floor will require the use of a mineral mixture with a small amount of synthetic additives - it will provide greater elasticity and the ability to tolerate significant temperature variations.

In addition, the old surface can not handle so intensely - it will be enough to walk on it with a metal brush. Before laying the glue on the floor, it is worth wetting the base so that it will better bond with it - this is not required only when using ready-made solutions sold in large buckets.

Street work

Quite an interesting question is whether it is possible to do so if you are laying paving slabs to create exterior structures - paths, platforms, and terraces.The answer to it is much easier to find - you just need to check the quality of the fit of the blocks and try to get one of them using a solid, durable knife or pry bar.

If the paving slabs can be reached with considerable effort, then it is laid very firmly and tightly - otherwise it will move under the mass of the new surface, breaking its integrity.

The process begins with falling asleep on top of a new cushion material consisting of loose soil, gravel and sand - each of these layers must be compacted individually. Top need to lay paving slabs, to increase the strength of which is to use a small vibrating machine or a mallet with a large striker.

Related news

  • Photos of the forgotten genocide in Nazi-occupied Poland
  • Chervonograd: a selection of sites
  • Christmas costumes for children
  • Effective and natural remedy for acne
  • Motorsport: a selection of sites
  • How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one

    How to put a new tile without removing the old one